[이스라엘] IDE, 염수 제거 기술 도입

수처리 솔루션 전문업체인 IDE Technologies는 소금물 제거 기술인 MAXH2O를 출시했다. MAXH2O는 염수 제거 설비에서 염수 제거를 효과적으로 줄이는 것을 목표로 한다.

해수 역삼투(BWRO) 담수화 설비의 염수 회수율을 높이기 위해 MAXH2O 탈염기 기술은 염수 회수 시스템의 전통적인 한계를 극복하는 독점적인 역삼투(RO) 시스템과 통합 염분 침전 유닛을 통합한 것이다. 기존 및 신규 BWRO 담수화 플랜트에 대한 MAXH2O 조기 조종사는 최대 98 %까지 염수 회수율을 증가시켰다.

MAXH2O 기술자(desalter)는 또한 추가 화학물질을 사용하지 않고도 용해성이 적은 염분에서의 스케일링, 유기오염 및 바이오 파울링과 같은 다른 문제를 해결한다. MAXH2O는 독립형 시스템으로 설치하거나 기존 BWRO 플랜트에 염수 흐름의 꼬리 단위로 연결하여 플랜트 생산을 극대화하고 염수 배출 흐름을 최소화 할 수 있다.

BWRO 플랜트의 회수율을 높이고 이러한 담수화 플랜트에서 염수가 거부되는 양을 줄임으로써 전세계의 물 수요를 충족시키면서 염수의 환경영향을 줄이는 데 도움이 된다.

[원문보기]

IDE launches brine desalter technology

Water treatment solutions specialist, IDE Technologies, has announced the launch of its brine desalter technology, MAXH2O, which aims to effectively reduce brine reject from brackish water desalination plants. 

To increase brine recovery of brackish water reverse osmosis (BWRO) desalination plants, the MAXH2O desalter technology integrates a proprietary reverse osmosis (RO) system with an integrated salt precipitation unit, which together overcome the traditional limitations of brine recovery systems. Early pilots of MAXH2O on both existing and new BWRO desalination plants have shown an increased brine recovery of up to 98%.

The MAXH2O desalter also addresses other challenges such as scaling from sparingly soluble salts, and organic fouling and biofouling, without the use of additional chemicals. MAXH2O can be installed as a standalone system or connected to an existing BWRO plant as a tail unit on the brine stream to maximise the plant production while minimising the brine discharge flow. 

Increasing the BWRO plants’ recovery, thus reducing the amount of rejected brine from these desalination plants, helps to meet global water demands while reducing the environmental impact of brine.

[출처 = Filtration+Separation(http://www.filtsep.com/desalination/news/ide-launches-brine-desalter-technology/) / 2018년 8월 22일]

저작권자 © 워터저널 무단전재 및 재배포 금지